Middle
Middle-boosted
Lead (3)
Lead (4)
This tone control switching option is remotely controllable via footswitch, so you can
adapt the two fundamental Lead sounds on the fly, say to better support rhythm
guitar work, singing leads, and slashing power chords.
This is the preamp voicing section's passive high-frequency EQ for Channel 3,
and Channel 4, .
To help you get acquainted with the amp's fundamental sounds, I recommend that
you set all tone controls to about the center or 12 o'clock position. For higher-gain,
high-volume lead sounds, your best bet is to turn the Treble and the Presence knob
down to prevent the pickups and speakers from generating feedback (a setting in the
9-to-1 o'clock range is recommended).
Though this passive voicing section's controls range is narrower than that of a
comparable active system, its EQ curve is tweaked specifically for its designated
purpose and will give you satisfying results. What's more, in combination with the
Presence and the Depth Punch control feature in the poweramp stage, you have heaps
of voicing options for tailoring basic sounds to taste.
Switches back and forth between the nd control
knobs (Mid EQ Lead channels) and boosts the midrange in Clean and Crunch mode.
The LED above the button lights up to indicate is activated.
It may also be switched using a Z-9 Custom Footswitch (S.A.C. F page 26)
connected to the S.A.C. Port (37) or a footswitch connected to jack (39).
The two mid controls, targets and shapes
specific midrange bands crucial in voicing a guitar's sound. This option
A tip from the designer:
26 Lead Volume-3
27 Lead Volume-4
A tip from the designer:
gives you a more expansive sound that is excellent for grinding out heavy-duty
riffs or mid-scooped Lead sounds, while brings up the low mids,
making it a great choice for very warm and creamy leads.
Determines the level of Channel 3, . Twist this knob to adjust Channel 3's
volume and dial in the desired balance of levels with Channel 1, 2 and 4. Because this
volume control is located pre effects loop, it also determines the effects send level for
Channel 3.
The red LED to the right of the knob lights up to indicate Channel 3, is on.
Determines the level of Channel 4, . Twist this knob to adjust Channel 4's
volume and dial in the desired balance of levels with Channel 1, 2 and 3. Because this
volume control is located pre effects loop, it also determines the effects send level for
Channel 4.
The red LED to the right of the knob lights up to indicate Channel 4, is on.
(23) a (24)
1-6 and F2-6,
For more details see the chapter 37 and 39 on page 14 and 15!
(23) and (24),
tone-switching
25 Treble
28 Middle-boosted (button)
Lead (3)
Lead (3)
Lead (4)
Lead (4)
Middle Middle-boosted
Middle-boosted
Middle Middle-boosted
11
(28 strony)
(37 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji